Water Based Ink PRINTPERFEKT EX-AR – Puff Effect

Water Based Ink PRINTPERFEKT EX-AR – Puff Effect 2017-10-08T17:01:28+00:00

Project Description

CHT #PRINTPERFEKT EX-AR from Germany

Ready to use paste for producing , three-dimensional foam prints; stable to abrasion

Contact Us Now!

SCREEN PRINTING WITH

PRINTPERFEKT EX-AR

Aqueous synthetic dispersion

Screen Print Pastes from CHT

UNIQUE IDEAS. UNIQUE SOLUTIONS

PRINTPERFEKT EX-AR is an extremely heat-resistant,  water-based foam print paste for producing three-dimensional effects with a very high stability to abrasion.

PRINTPERFEKT EX-AR can be dyed with the usually available pigment dyestuffs in every desired shade.

The print paste amount to be applied depends on the substrate, the motif and the desired foam height. It is
mainly controlled by the selected screen fineness, the type of squeegee, the number of passages and the
viscosity of the print pastes. When using highly pigmented pastes or pastes with reduced viscosity, a higher
application amount is required to achieve the same foam heights.

  • Important criteria that contribute to the foam height:
    – amount of print paste applied
    – penetration depth into the substrate
    – recipe composition
    – fixation conditions
Screens made of monofilament polyester gauze with a fineness of 20 – 60 threads/cm or rotary screens with up
to 60 meshes have proven to be good.
The prints are dried at temperatures around 100 – 120 °C and foamed and cured by means of dry heat at  160 °C for 2 – 4 min or at 170 °C for 2 – 3 min.

Print Your T-Shirts With The Right Ink | Screen Printing Perfect

Summary

  • peach skin surface
  • 3-D effect by foaming
  • soft hand
  • not sticky
  • high opacity
  • formaldehyde, PVC, phthalate, white spirit free
  • GOTS registered

Water Based Ink PRINTPERFEKT EX_AR – Puff

Any question to the product ?

CONTACT US
CONTACT US

For more products visit

CHT INKS HOME
CHT INKS HOME

Leave A Comment